How to Seal a Driveway – The Idiot’s Guide

  1. Purchase a driveway squeegee

    About $15 at Home Depot or Lowes, or you can snag one online. They look like this:

  2. Buy your sealer

    • It’s relatively cheap at $15 – $25 per 5 gallon bucket
    • For previously sealed driveways, you’ll get 400 square feet of coverage per 5 gallon bucket
    • For new driveways, expect to get about 200 square feet per 5 gallon bucket
  3. Get a mixing paddle for your drill

    Mix it up. All the good thick sealant will settle to the bottom of the bucket, so it needs a good stir.

    Avoid stirring the sealer by hand, you’ll tire yourself out before you start!

    You might think that the paddle would cause the sealer to splash all over the place. You’d be surprised, just keep the paddle near the bottom of the bucket while it’s spinning.

  4. Put up a barricade at the end of your driveway

    • Cement blocks with a board across them
    • Thick rope or ribbon between two trees
    • Road / construction cones, or

  5. Wear old clothes and shoes

    You might be thinking, “I’ll just be really careful”. Don’t even try it. Nobody, in the history of driveway sealing has been able to walk away clean, without a spec of sealer on them. Like trying to dive into a pool without making a splash, it’s just not possible.

    You could wear decent shoes and wrap some plastic bags around them.  Or, you could spend $10 on a pair of shoes from Walmart that you can say good-bye to forever when you’re finished.

  6. Make sure it’s nice and hot out and won’t rain for 48 hours

    In the south, this is an easy rule to follow. But in the North, that really only gives us a window from June – September.

    If it does rain on your sealer while it’s still drying / curing, it will combine to create a white-colored rough texture that does not look good against black driveways.

    One way to be safe is to do a rain dance in reverse.

  7. Repair cracks and holes with asphalt patch

    This seems like more work than it’s worth, but think about it. You’re sealing your driveway for two reasons: aesthetics and protection. The sealer can’t prevent water from getting under your driveway via cracks and holes. This water can freeze and expand – you get the rest.

    So, take a few minutes to fill those cracks and holes. Otherwise, this could happen:

  8. Start Sealing

    Pour a gallon at a time and spread a thin coat in a cross pattern (squeegee one direction, then the other to fill in all pores).

    The 5 Gallon bucket is heavy, so it can be helpful to have a one-gallon bucket on hand to scoop some out of the larger bucket. Unless you’re this guy:

  9. Stay off it!

    Give it at least 24 hours before walking or driving on it. Unless you have special talents.

diy

Share
Published by
diy

Recent Posts

The DIY VSCO Girl

Not everything VSCO has to be expensive. If you have a few minutes, here are two very quick DIY projects…

3 months ago

FSBO: How to Sell Your House as a For Sale by Owner

Homeowners in the US are a restless lot. Data out there shows that the average household moves every five to…

4 months ago

How to Reuse All Those Plastic Bottles

“Saving the planet” has turned from a cool slogan into a necessity. The amount of waste we produce each year…

5 months ago

Building a Man Cave Inside Your Home

Building a man cave is just as exciting as all the time you’ll spend in it having fun with your…

6 months ago

DIY: Reupholster Your Chair in 8 Easy Steps

Chairs have a tendency of getting wear and tear on their covers from being used heavily. Or sometimes, you just…

6 months ago

5 Tips to Keep Your House Clean if You Have Kids

When kids are in the house, it can be a challenge to keep the house clean all the time. Maybe…

7 months ago

We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies.